bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Damon Daybreak Motorhome


  • 2-1/2 Inch Round, 2-Wire Amber Clearance Lights for Motorhome
  • Assuming your clearance lights are surface-mounted, we do have an option for 2-1/2 inch round, 2-wire amber clearance lights: - Optronics LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Round - Amber Lens # MCL0040ABB These are typically used on trailers, but they do have just the ground and power wire running from them, so you can use them as replacements since yours have the same wiring. I have added a link below to a video review for you to check out as well if...
    view full answer...

  • Will A Furrion Chill HE RV Air Conditioner Replace A Coleman Mach 8333A876
  • The Furrion Chill HE RV Air Conditioner System # FR85PV can replace your Coleman unit, but most Coleman's have a 9-pin connector so you'll need to pick up an adapter # ACCOLKIT in order to plug your new wire harness into the old controller. The opening size for AC units is standard at 14" x 14".
    view full answer...

  • Powered Step Recommendation For A 2005 Damon Challenger
  • The Kwikee Electric RV Step Complete Assembly - Triple - 23 Series - 24" Wide Item # LC3694042 are the closest to your current mounting bracket dimensions of 16" x 28". This kit comes with everything you need to automatically open and close your steps.
    view full answer...

  • Replacement RV Step Motor for Part Number 300-1406
  • The correct replacement for your 300-1406 motor is the Replacement Motor for Lippert Electric Coach Step part # LC301695. If you need other components I would need more info on the steps as this specific motor fits quite a few different steps. If it's a Kwikee 25 Series most likely you just need the part # LC369354 for the gear.
    view full answer...

  • Recommended Replacement For Kwikee 903906000 RV Electric Steps
  • According to the code you provided you would have a 39 series step so the Kwikee Electric RV Step Complete Assembly # LC3724742 would be the correct replacement. The exact replacement for this specific model was discontinued so you'll notice that the dimensions are slightly off (about 1/4") but this is going to be the closest option. In my experience it's best to replace the door sensor when you swap out the steps since the it always seems be the cause of any malfunctions after steps...
    view full answer...